Nexen TC920V 964356 - Manual (Page 37)

34 FORM NO. L21268-C-1013
12. SERVICE INSTRUCTIONS
12.1 FUSE MAINTENANCE
1. To change a fuse, first turn off the power.
2. Next, correct the wiring or equipment issue that was
the cause for the blown fuse.
3. Replace fuse with spare fuse (or equivalent).
Fuse 1: 250V, 3A (Slow-blow Type)
Fuse 2/3: 250V, 4A (Fast-blow Type)
Both fuses are 0.250 in x 1.250 in
WARNING
When replacing a fuse, be sure to turn
off the primary power supply and the
controller. If you replace the fuse with
the power on, an electric shock or failure
may occur.
FUSE2
FUSE3
POWER
FIGURE 12.1 REPLACING A FUSE