XAIRCRAFT MINIX - Manual (Page 16)

14
©2013 XAircraft All Rights Reserved.
RC Neutral Point Calibration
 Cancel all trims on radio before calibration.
 Rapidly flick the Flight Mode Switch until LED is flashing Purple.
 Throttle up to neutral point, Led green-green flashing, show as below
 Release stick as shown and rapidly flick the Flight Mode Switch until solid green from LED.
 RC Neutral Point Calibration completed when re-power on
RC Reverse Calibration
 Cancel all trims on radio before calibration
 Rapidly flick the Flight Mode Switch until LED is flashing Purple.
 Both sticks to top-right corner as shown below,LED green-green-green flashing
 Rapidly flick the Flight Mode Switch until solid green from LED
 RC Reverse Calibration completed when re-power on