WebDT DT390/ DT390i Modules BOG (XPE/ XPPro) - Manual (Page 5)

WebDT Mobile Tablet Barcode Scanner Operation Guide
Mobile POS Tablet
RFID Reader
Installation
The RFID reader is preinstalled as an option for the WebDT 390/
390i.
www.dtresearch.com
To Connect RFID Reader Module
To connect the RFID, you can use the WebDT Keyboard Wedge to connect. Tap on the
icon in the task bar, a menu displays as shown in the picture below. Select Connect RFID.
To Test RFID Reader Module
Click 1. Start | All Programs | Accessories | NotePad to run
the Notepad.
Place an ISO card within range of the RFID tag (see reading
2.
range in specifications). The output will appear in the
Notepad screen.
Verify the captured data.
3.
SPECIFICATIONS
Frequency 13.56MHz ±7 KHz
Module Mode FSK
Reading Range Within 30mm
HF RFID Reader ISO 15693,1443A(B), Felica UID
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com
Copyright © 2011, DT Research, Inc. All Rights Reserved.
DT Research and WebDT are registered trademarks of DT Research, Inc.
RFID Reader
RFID
RFID connected
WebDT 390/ 390i OPERATION GUIDE