WebDT DT362 User Manual
Page 2
DT362
ENGLISH
2
Button Functions
BUTTON ACTION
Programmable
Programmable, launch soft (on-screen) keyboard (default)
Launch SAS (Secure Attention Sequence)
Generate Ctrl+Alt+Del keys to invoke the security windows defined under Windows XP
Programmable,
Change display orientation (portrait/ landscape) (default)
Programmable, system utility menu (default)
Programmable,
As scanner trigger when equipped with the scanner module
Push/release typically enters Standby mode, or Push/release exits Standby mode or
restarts device (software dependent)
Push and hold (over 4 seconds) invokes hardware shutdown
The DT362
Battery/Power LED
Wireless LED
Stylus
For locking the MSR module
Internal Battery Switch
(back panel)
1
8
9
2 3
4
5
6
8
9
7
Input/ Output Ports
USB Ports
Headphone Jack
Microphone Jack
DC Power Input
A
D
C
B
A
B
C
D
1 2 3 4 5 6 7
3
ENGLISH
Power/Battery LED Status:
Blue indicates the battery is 25% to 100% charged
•
Blinking blue indicates the battery is charging
•
Orange indicates that the battery is between 11% to 25%
•
Blinking Orange indicates that the battery is below 10%
•
Precautions
Always exercise care when operating and handling the DT362.
•
Do NOT apply excessive pressure to the display screen.
•
We recommend using the Stylus provided to keep the screen clean.
•
Avoid prolonged exposure of the display panel to any strong heat source. Wherever
•
possible, the DT362 should face away from direct light to reduce glare.
If the AC-DC power adapter is used to recharge or power the device, do NOT use any
•
AC-DC adapter other than the one provided with the device or acquired from the
manufacturer or its partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present,
•
immediately power off the DT362 and disconnect all power sources. Report the
problem to your device provider immediately.
Never attempt to disassemble the DT362, as this will void the warranty.
•
THE DT362
Basic Features
The DT362 wireless tablet integrates a bright and responsive touch display, a USB port,
and embedded networking elements such as wireless LAN or optional 3G. The primary
device is complemented by a suite of accessories, including battery expansion, docking
cradles, and carrying cases, for a comprehensive user experience.
A DT362 typically integrates an 802.11a/b/g/n wireless LAN (WLAN) adapter that may
connect to other wireless devices or access points. If your DT362 does not come with
such a network adapter, please consult your device provider to establish the desired
network connectivity.
Button Management
Calibration
Wireless Network Settings
Battery and Power Meter