Vortech Universal Big Block Carbureted System User Manual

Page 15

P/N: 4GA020-030

08DEC08 V3.0(BBC LowMount(4GA..030 V3.0))

A. Install the correct length V-belts onto the

water pump, power steering and crank pul-

leys.

B. Tighten all bracket hardware that was

“snugged” earlier and adjust/tighten the

V-belts making sure all belts are routed cor-

rectly. Make sure all hoses and wiring are

routed correctly and secured, that all coolant

modifications are complete and hose clamps

are properly tightened.

6. ACCESSORY DRIvE BElTS (TWIN PlATE v-7 ONlY, v-4 RACE SKIP TO

SECTION 8)

NOTE:

Belts are to be sized per each application and

purchased separately and are not included in this

base kit.