Vortech Universal Big Block Carbureted System User Manual

Page 14

P/N: 4GA020-030

08DEC08 V3.0(BBC LowMount(4GA..030 V3.0))

G. Install the supplied 1/8"NPT x 90° x #4 fitting

into the supercharger oil feed nozzle. Do not

use teflon tape on the threads or oil feed

blockage may result.

H. Carefully route the previously installed oil feed

hose up to the supercharger oil feed fitting

taking care not to kink the hose. Carefully

thread the hose end onto the feed fitting.

LIGHTLY LUBRICATE THE FITTING WITH

ENGINE OIL.

CAUTION: Ensure that the oil supply system is

free of contamination that might plug

the supercharger oil inlet orifice. Hold

the supercharger oil feed fitting with

wrench while tightening the oil feed

line fitting.

5. SUPERCHARGER MOUNTING, CONT'D (TWIN PlATE v-7 ONlY, v-4 SKIP TO

SECTION 8)