Vortech 1996-2004 Ford 4.6 Mustang GT User Manual

Page 4

Most Mustangs produced after 11/01/96 may utilize a water pump pulley
that employs a large lip on both the front and rear edges (earlier units
used a lip only on the rear). The front lip on the pulley may cause belt
installation problems. For proper clearance, the "1996 style" pulley (Ford
P/N F3LY-8509-A) may be installed. This pulley is available from your Ford
dealer or Vortech Distributor (Vortech P/N 4FK016-081).

This product is protected by state common law, copyright and/or patent.
All legal rights therein are reserved. The design, layout, dimensions,
geometry, and engineering features shown in this product are the
exclusive property of Vortech Engineering, LLC. This product may not be
copied or duplicated in whole or part, abstractly or fundamentally,
intentionally or fortuitously, nor shall any design, dimension, or other
information be incorporated into any product or apparatus without prior
written consent of Vortech Engineering, LLC.

FORD 4.6L SOHC MUSTANG

IMPORTANT NOTES

1999-2004 Models

1997-1999 Models

This kit requires ECM modification and the installation of a Vortech ECM

Module. The ECM must be sent directly to Vortech by the installing

customer (the charge for this service with module installation has been

included in the purchase price).

• Included in this kit is a prepaid next-day air shipping box and a

credit tag for one (1) Vortech ECM Module.

• The modules are made specifically for each individual vehicle with

respect to the factory ECM calibration.

• Simply contact the Vortech Service Department at (805) 247-0226 to

request a Return Authorization Number (See ECM Module Credit

Tag for more details).
- Mail to Vortech the enclosed "ECM Module Credit Tag" (send

original tag - no photocopies will be accepted) and ECM in the

supplied box.

- Turnaround time will be 1-2 days (each application varies). Vortech

will give an estimate at the time of your order.

Your Vortech ECM Module comes with a twelve (12) month limited

warranty from the original date of purchase of your supercharger system

(see Owner's Manual for details).
NOTE: Vortech Engineering is not responsible for engine or ECM damage

due to an improperly installed/mishandled ECM module or ECM.

P/N: 4FL020-010

12APR08 v3.0 MusGT Bull(4FLv3.0)