Velodyne WiConnect - Manual (Page 9)

SETUP #2: LESS COMMON (RECEIVER HAS NO LFE/SUB OUTPUT)
[ 6 ]
W iConnect System User’s Manual
SET UP
1. Use one of the RCA cables supplied
to connect the wireless transmitter’s
R and L inputs to your receiver’s
R and L outputs.
2. Plug the wireless transmitter’s 5V DC
power adapter into the back of the
wireless transmitter. Plug the other
end of the adapter into a power outlet.
3. go to the Select Receiver Options
for Optimal Subwoofer Performance
instructions next.
The WiConnect receiver must be
within 50 feet (15 meters) from
its transmitter to be able to receive the
wireless signal. Also, make sure that
the same CHANNEL is selected on
both the transmitter and receiver.
1
2