Velodyne WiConnect - Manual (Page 11)

Connect Subwoofer
1. Place WiConnect System RF receiver near your subwoofer. Do not place in a metal cabinet — this may degrade reception performance.
2. Attach included 5V DC power adapter to WiConnect System receiver.
3. Attach the appropriate RCA cables, depending on the audio receiver option chosen between the WiConnect System receiver and
your subwoofer.
4. Plug RF receiver or WiConnect System power adapter into wall outlet.
5. Turn the VOLUME knob to MIN to prevent blasting music when you first use the subwoofer. you can increase the VOLUME to the
correct level later.
6. Turn on subwoofer.
7. you’re done. No more wires to connect!
7. Go to the Select wireless broadcast Channel instructions next.
Select Wireless Broadcast Channel
The wireless transmitter can broadcast your audio signals on one of four selectable channels. Multiple channels are made available in case
other devices in your home are using some of the channels for communication, or if you plan to use more than one WiConnect System
(only up to four total WiConnect Systems can be used within 50 feet of each other).
To select the broadcast channel:
1. Review the wireless broadcast Considerations below.
2. Use the CHANNEL switch on the back of the wireless transmitter to select “1”, “2”, “3”, or “4” as the broadcast channel.
3. Use the CHANNEL switch on the back of the wireless receiver to select the same broadcast channel as you selected on the
wireless transmitter.
Wireless Broadcast Considerations
All wireless devices like the WiConnect System may be susceptible to radio frequency (RF) interference from other devices, depending on
frequency used. Other RF devices include WiFi Internet access, computer equipment and routers; WiFi solar panel monitoring systems;
video game consoles, cordless telephones, blue tooth devices, baby monitors and microwave ovens. In particular, any devices operating in
the 2.4 GHz band may cause intermittent wireless connections between the wireless transmitter and wireless receiver.
To prevent wireless broadcast interference problems, keep wireless transmitters at least 2’ apart. Any interference effects from a microwave
oven will cease once the oven stops operating and may be resolved on a long-term basis by increasing the physical distance between the
WiConnect System and the microwave oven.
If the WiConnect System sound is intermittent, check that another wireless device isn’t within 2’ of either the wireless transmitter or the wireless
receiver. Also, try one of the other broadcast channels of the WiConnect System as it may be free of the RF interference.
[ 8 ]
W iConnect System User’s Manual
SET UP