Turning Technologies CPS - Manual (Page 8)

CPS for PowerPoint Mac 8
Changing the Channel on a CPS Pulse Clicker
The clickers need to be set to the same channel as the receiver when polling.
1 Press the Power button.
2 Simultaneously press both arrows and release.
3 Press the button.
Channel appears on the screen.
4 Enter the two-digit channel number.
NOTE
The channel number must be between 01 - 75.
5 Press the Enter button.
Clicker # appears on the screen.
6 Enter the number found on the front of the clicker.
7 Press the Enter button.
A summary appears on the screen, and the clicker turns off.
Changing the Channel on a CPS Spark Clicker
The clickers need to be set to the same channel as the receiver when polling.
1 Press the Power button.
2 Simultaneously press both arrows and release.
3 Press the button.
Channel appears on the screen.
4 Enter the first digit of the channel number by pressing the button to increase the number or the button to
decrease the number.
NOTE
The channel number must be between 01 - 75.
5 Press the right arrow to advance to the second digit and repeat step 4.
6 To save the channel number, press the right arrow .
Clicker # appears on the screen.
7 Repeat steps 4 - 5 to enter the number on the front of the clicker.
8 Press the right arrow to save the clicker ID.
A summary appears on the screen, and the clicker turns off.
turningtechnologies.com/user-guides