Raid controller modules, Scsi-to-scsi raid controller module – StorCase Technology 9-Bay 4U SCSI Ultra320 User Manual
Page 56
InfoStation 9-Bay User's Guide - Rev. C02
StorCase Technology, Inc.
Appendix B - Optional Accessories
47
IFS9_13
Figure B-4: SCSI-to-SCSI Dual RAID Controller Module Unit
RAID Controller Modules
SCSI-to-SCSI RAID Controller Module
The SCSI-to-SCSI RAID Controller Module units are internal RAID controllers specifically
designed for the InfoStation chassis.
The Single RAID Controller Module unit (P/N S10A122) is an Ultra160-to-Ultra160 stand-alone,
dual host port controller with two SCSI disk channels (supporting 2x2 configurations).
The Dual RAID Controller Module unit (P/N S10A126) is an Ultra160-to-Ultra160 failover, dual
host port controller with two SCSI disk channels (supporting 2x2 configurations). See Figure
B-4 below.
A separate upgrade module (P/N S20A125) is also available to upgrade the Single RAID
Controller Module unit to a Dual RAID Controller Module configuration (Figure B-6).
Both units include a 10' RJ45-DB9 serial cable for connection between controller and ANSI
Display Terminal (or PC). RAID Controller "Kits" containing external I/O cables are also available.
Contact StorCase for further ordering information.