StorCase Technology 9-Bay 4U SCSI Ultra320 - Manual (Page 29)

20 InfoStation User Interface
StorCase Technology, Inc. InfoStation 9-Bay User's Guide - Rev. C02
Enabling/Disabling the Buzzer
The following steps show how to enable/disable the InfoStation alarm/warning buzzer.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default
Display. The menu system will automatically cancel after 15 seconds of
User inactivity.
1. Press ENTER at the Default Display so that
display = Status.
2. Press DOWN until display = Buzzer.
3. Press ENTER so that display = BUZ=ON (or
BUZ=OFF).
This is the current buzzer setting.
4. Press UP or DOWN to enable or disable the
buzzer.
5. Press ENTER to accept the change.