StorCase Technology 9-Bay 4U SCSI Ultra320 - Manual (Page 35)

26 InfoStation User Interface
StorCase Technology, Inc. InfoStation 9-Bay User's Guide - Rev. C02
Banner Set-Up
The following steps show how to customize the InfoStation start-up banner.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default
Display. The menu system will automatically cancel after 15 seconds of
User inactivity.
1. Press ENTER at the Default Display so that
display = Status.
2. Press DOWN until display = Setup.
3. Press ENTER so that display = Enc. ID.
4. Press DOWN until display = Banner.
5. Press ENTER to change the Banner.
The first letter/character will start to blink.
6. Press UP or DOWN to change the first letter/
character.
7. Press ENTER to accept the new or existing
letter/character.
8. Repeat Steps 6-7 to change banner characters
2-8.
Pressing ENTER at the last letter/character will
accept the new banner altogether.
ENTER
S t a t u s
S e t u p
T E M P : x x C
E n c . I D
C a n n e r
ENTER
DOWN
ENTER
DOWN
B a n n e r
B a n n e r
UP/DOWN
C a n n e r
ENTER