StorCase Technology 9-Bay 4U SCSI Ultra320 - Manual (Page 32)

InfoStation User Interface 23
InfoStation 9-Bay User's Guide - Rev. C02 StorCase Technology, Inc.
Serial Port Set-Up
The following steps show how to view and change the InfoStation serial port option.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default
Display. The menu system will automatically cancel after 15 seconds of
User inactivity.
1. Press ENTER at the Default Display so that
display = Status.
2. Press DOWN until display = Setup.
3. Press ENTER so that display = Enc. ID.
4. Press DOWN until display = Ser.Port
5. Press ENTER so that display = S-Portx .
This is the current serial port set-up.
6. Press UP or DOWN to change the serial port
option.
7. Press ENTER to accept the change.
ENTER
S t a t u s
S e t u p
T E M P : x x C
E n c . I D
ENTER
DOWN
ENTER
DOWN
S e r . P o r t
S - P o r t = 0
UP/DOWN
ENTER
S - P o r t = 1
S - P o r t = 1