StorCase Technology DS90 - Manual (Page 26)

Kingston Technology Company DS90 User's Guide - Rev. C00
20 Appendix B - Accessories and Options
3.5 Inch Drive Adapter Brackets (Optional)
1040400124 A
LEFT
FRONT
Data Keeper
Bezel Adapter Bracket
Face (2ea.) Adapter
Bracket (2 ea.) Bracket to Drive
Screw (4 ea.)
0071
Figure B-5: Optional 3.5 Inch Drive Adapter Brackets (P/N DX100-35/KIT)
The Kingston Technology 3.5 inch peripheral adapter brackets are designed to mount 3.5 inch
peripherals with either fixed or removable media into 5.25 inch mounting bays of computer
systems and external chassis. Before installation, make sure to have the appropriate
documentation at hand for reference, such as computer system and drive manufacturer's
manuals.
NOTE: The adapter brackets are not required for 3.5 inch fixed media devices such as
hard drives, which may be bottom mounted to the existing mounting bracket
inside the unit.
Steps for installing a front-loading drive or fixed media devices with an exposed front
bezel:
1. Make sure all system and peripheral power is off and disconnected.
2. Remove the system or peripheral expansion cover and face plate.
3. DO NOT REMOVE THE ADAPTER BRACKET FACE OR RETAINING SCREWS.
These must be left in place on both brackets for installations which expose the drive
bezel.
4. Attach the adapter brackets (DX100-35/KIT) to the drive with the screws provided as
shown in Figure B-5.
5. The face of the adapter bracket should be flush with the face of the drive you are
installing.
6. Tighten the screws.