StorCase Technology DS90 - Manual (Page 22)

Kingston Technology Company DS90 User's Guide - Rev. C00
16 Appendix B - Accessories and Options
Appendix B - Accessories and Options
Installing the Audio Connector
The DS90 provides audio connectors for left and right channel audio output with CD-ROM
devices. The left and right audio connectors are contained in a single module which may
easily be attached to the DS90 back panel with two screws provided. (Figure B-1).
1. Remove the two (2) plastic knockouts on the DS90 back panel by gently tapping
on them with a flat-bladed screwdriver.
2. Insert the provided audio connector module into the DS90 and insert the red and
white connectors through the openings in the back panel. The red connector
should be on top.
3. Align the connector module screw holes with the hole openings in the DS90 back
panel and attach the Phillips pan head screws.
Figure B-1: Installing the Audio Connector
Red = Left Channel
White = Right Channel
Audio
Connector
Screws
0283