StorCase Technology DS90 - Manual (Page 25)

Appendix B - Accessories and Options 19
DS90 User's Guide - Rev. C00 Kingston Technology Company
Stacking Multiple DS90 Chassis
The DS90 chassis is designed so that multiple units may be safely stacked on top of one
another. This can be accomplished by removing the existing feet of the upper unit and
replacing each foot with the provided special double-sided foot designed for stacking
configurations as shown in Figure B-4. Each foot is attached to the chassis with a small pin
snuggly inserted into a hole. The existing feet can be removed by hand or by gently prying
them out with the tip of a flat-bladed screwdriver.
Figure B-4: Installing the Stacking Feet
0284
Data Silo
Data Silo