StorCase Technology DS550 - Manual (Page 15)

D89-0000-0187 Rev. A04 StorCase Technology, Inc.
S30A110 15
Software Installation
NOTES: To install and operate the SAFTEmon ® software, the computer system must
meet certain system requirements (refer to page 5 of this document for further
information).
An IP address is required for remote monitoring via the internet. Please contact
your system administrator to set up an IP address for the DS550 and host
system.
SAFTEmon is user-customizable. Custom modification of the SAFTEmon files
requires a certain level of HTML and Javascript experience on the part of the
user.
1. Exit and close ALL programs before installing SAFTEmon onto the computer sys-
tem.
2. Insert diskette into computer. Double-click the SAFTEmon ver1.3.exe file (an
Installation Wizard will take you through the SAFTEmon installation process).
If the Installation Wizard experiences problems with installing SAFTEmon onto the computer
system, you will have to manually install SAFTEmon as directed below:
1. Open the "Other Platforms" folder.
2. Create a directory (e.g. c:\saftemon)
3. Copy the entire archive into the newly created directory.
4. Run SAFTEmon.exe
The SAFTEmon.exe window should appear on the screen (Figure 12).
NOTE: If an error occurs while running SAFTEmon, check the connection between the
host system and the DS550. SAFTEmon will not run if the host system and
DS550 are not properly connected.