StorCase Technology DE200i-SWU2 - Manual (Page 33)

StorCase Technology Inc. DE200i-SWU2 User's Guide - Rev. A00
26 Appendix D - Optional Accessories
Drive Cover
Slip Drive Cover
Lip into Top Rear
of Carrier. The
Sides of the Cover
Will Fit Between
the Drive and the
Carrier. Mounting
Holes Must be
Towards Rear of
Carrier. 1
Swing Drive Cover
Down, Covering
the Drive. Make
Certain You Do
Not Damage
Connector Pins or
Cables. 2
Slide Drive Cover
Forward Making Certain
Front Cover Lip is Inside
Carrier. Fasten Screws. 3
Full Drive Cover (optional)
Disk
Carrier
Drive
Cover
Mounting
Holes
1
2
3
0488
Figure D-2: Full Drive Cover
The full drive cover (DX100-COV) is an attractive metal cover which can provide
additional protection for 3.5" half-height drives, preventing foreign material from coming in
contact with the drive and cables. The full drive cover is similar to the cable cover
provided with the DE200i-SWU2 except the full drive cover protects the drive as well as
the cables. It is easily installed with two (2) #6-32 x 3/16" flat head screws as shown in
the illustration above.
NOTE: The full drive cover may not be compatible with all 3.5" half-height drives. Exact
drive height and fit within the Data Express frame can vary between drive
manufacturers. Please contact StorCase Storage for technical assistance
before ordering the full drive cover.