beautypg.com

Carrier installation – StorCase Technology DE100i-SWU2 User Manual

Page 29

background image

Kingston Technology Company

DE100i-SWU2 User's Guide - Rev. A00

22

Appendix B - Factory-Installed Options

Figure B-4: Device Spin Up/Down Timer

Carrier Installation

Follow the procedures below to install the Data Express carrier into the receiving frame

equipped with the isolator board.

1. Install the Carrier into the Receiving Frame. A "u" will be present on the front

panel.

2. Turn the key lock mechanism, located on the front of the receiving frame,

counter-clockwise to the On position. This locks the drive into the receiving

frame and activates the isolator board. The drive will begin to spin up and the

unit number on the display will begin flashing.

3. After a short length of time the unit display will stop flashing, indicating that

the device is ready to be used.