StorCase Technology DE100i-SWU2 - Manual (Page 26)

DE100i-SWU2 User's Guide - Rev. A00 Kingston Technology Company
Appendix B - Factory-Installed Options 19
Figure B-1: Isolator Board Details
2. Remove the two (2) screws on the receiving frame motherboard.
NOTE: Save these screws for Step 5!
3. Attach two (2) drive standoffs to the mounting holes on the receiving frame
motherboard (Figure B-3).
4. Carefully align the connectors of the isolator board with the connectors on the
receiving frame motherboard and gently push the board into position. Make certain
that all connectors are properly mated.
5. Secure the board to the receiving frame standoffs with the same two (2) screws
from Step 2 (Figure B-3).