Speck Electronics MicPre 5.0 - Manual (Page 31)

Specifications
Chapter 3 Operation Section 25
Gain Range (Mic)
70 dB total
Gain Range (D.I.)
THD+n
(Gain +40, Output +12dBu)
Noise EIN (22Hz-22kHz)
(150 ohm load, 60dB gain)
Freqency Response
Mic input impedence
D.I. input impedence
Maximum input level
Max. output level (10k load)
HP Filter
Phantom Power
Dimensions
Weight
Power Requirements
+10 to +60dB in 5dB steps
-10/+10 variable trim
-20 to +40 dB in 5 dB steps
.002% nominal
-126 dBu
10Hz-200kHz (+0/-3dB)
4.6k ohms
50k ohms
+18dBu (without pad)
+30dBu (with 20dB pad in)
+28dBu at active outputs
+24dBu at transformer output
30Hz-250Hz (12dB/octave)
+48V regulated
HxWxD=1.75" x 8.5" x 8.00"
(44mm x 216mm x 203mm)
5 Lbs. (2.27kg)
100-120 VAC 50-60Hz
220-240 VAC 50-60Hz