Southbend SL-Series - Manual (Page 14)

E LECTRIC C ONVECTION O VENS
OPERATOR’S MANUAL 1181958 REV 5 (4/14) PAGE 14 OF 47
8. Insert two bolts (items “A” in the following diagram) up through the top of the lower oven and screw them into the
threaded holes in the bottom of the top oven. Tighten these bolts and the screws that you did not tightened in
the previous step.
I
NSTALLATION
9. Replace the right side insulation, exterior panel, and lower front panel that you removed in steps 4, 5, and
6 of this procedure.