beautypg.com

Southbend KELS-80 User Manual

Lectric, Team, Ettle

background image

Job Item#

www.yatesgd.com www.yatesgraphicdesign.com

Form KELS Rev 1 (November/2010)

E

lEctric

S

tEam

t

ri

-l

Eg

K

EttlE

SPECIFICATIONS:
Shall be a Southbend Model_________________________, self-

generating, electric, tri-leg kettle, ASME Code stamped, National Board

Registered, c-CSA-us and NSF certified. A double wall kettle interior

shall form a steam jacket around the lower 2/3 of the kettle. The jacket

enclosure shall contain distilled water which is factory sealed. The

bottom of the kettle shall be of hemispherical design for superior heat

circulation. Kettle will be mounted on 3 stainless steel tubular legs fitted

with a 4-hole adjustable foot for securing unit to the floor.
Construction shall be all welded #4 finish stainless steel type 304. The

liner on the 20, 30 and 40 gallon models shall be standard 316 for high

acid content cooking. The controls shall be integrally mounted and shall

include a power switch, thermostat, pilot light, low water light, vacuum/

pressure gauge, safety valve, and low water shut off.
The kettle shall be standard with removable elements. The 20, 30 and

40 gallon models are supplied with a hinged, counter-balanced, stainless

steel, domed cover. The 60, 80 and 100 gallon models are supplied

with a spring-assist, hinged, stainless steel, domed cover. The kettle

shall include a 2” (50 mm) draw-off valve.
The kettle shall operate in a temperature range of 165°F to 285°F (74°C

to 140°C) at a maximum pressure of 50 psi (345kPa).

OPERATION SHALL BE BY:

Electrically, self-generating closed steam system equipped for operation on:

208 VAC, 1 Phase, 50/60 Hz. (20 and 30 gallon only)

208 VAC, 3 Phase, 50/60 Hz.

240 VAC, 1 Phase, 50/60 Hz. (20 and 30 gallon only)

240 VAC, 3 Phase, 50/60 Hz.

OPTIONAL ITEMS AT EXTRA COST:

Type 316 stainless steel liner (60, 80 and 100 gallon models)

3" (76 mm) draw-off valve (TVT-3)

2" (50 mm) dairy valve (DDO-2T)

3" (76 mm) dairy valve (DDO-3T)

24 kw on 40, 60, 80 gallon

33 kw on 60, 80, 100 gallon

220 VAC, 1 Phase, 50/60 Hz (20 and 30 gallon only)

220 VAC, 3 Phase, 50/60 Hz.

380 VAC, 3 Phase, 50/60 Hz.

415 VAC, 3 Phase, 50/60 Hz.

480 VAC, 3 Phase, 50/60 Hz.

600 VAC, 3 Phase, 50/60 Hz.

380/220 VAC, 3 Phase, 50/60 Hz. 4 wire

415/240 VAC, 3 Phase, 50/60 Hz. 4 wire

Spring assist hinged cover for 20, 30 or 40 gallon models (CH-)

Two piece hinged stainless steel cover (2PHC-)

Etched gallon markings (GM-)

Etched litre markings(LM-)

Correctional package

ACCESSORIES:

Single pantry faucet with swing spout (SF-18)

Double pantry faucet with swing spout (DF-18)

One piece lift off cover (C-)

Triple basket assembly (TBA-)

Perforated strainer for draw-off valve (TPS-)

Solid stainless steel disc for draw-off valve (TSS-)

Graduated measuring strip (CMS-)

Strainer hook (SH)

Draw-off valve hose kit (DVHK-2)

Calibrated thermostat dial “F”

Calibrated thermostat dial “C”

M

odel

k

W

C

apaCity

KELS-20

12

20 Gallon

76 Liter

KELS-30

15

30 Gallon

114 Liter

KELS-40

18

40 Gallon

152 Liter

KELS-60

18

60 Gallon

227 Liter

KELS-80

18

80 Gallon

303 Liter

KELS-100

24

100 Gallon

379 Liter

This manual is related to the following products: