Dynex DX-LDVD19-10A - Manual (Page 30)

26
Maintenance DX-LDVD19-10A
General
Note: If the problem is not solved by using these troubleshooting
instructions, turn off your TV, then turn it on again.
Maintenance
Cleaning
• Before cleaning the screen, unplug your TV from the power
outlet.
• Clean your TV with a soft, dry cloth. If surfaces are extremely
dirty, use a soft cloth dampened with a weak detergent solution.
• Use an eyeglass cleaner to clean the screen. Never use alcohol,
paint thinner, or benzine.
• Before using a chemically treated cloth, read the instructions that
came with the cloth.
• Do not spray insecticide liquid near your TV. Such chemicals may
cause damage and discoloration to the exposed surfaces.
Care and handling of discs
Handling discs
Do not touch the playback side of the disc. Hold the disc by the edges so
that fingerprints do not get on the surface. Never stick paper or tape on
the disc.
Storing discs
After playing, store the disc in its case. Do not expose the disc to direct
sunlight or sources of heat and never leave it in a parked car exposed to
direct sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor picture quality and
sound distortion. Before playing, clean the disc with a clean cloth. Wipe
the disc from the center out.
Do not use strong solvents such as alcohol, benzine, thinner,
commercially available cleaners, or anti-static spray intended for older
vinyl records.
Servicing
Do not try to repair your TV/DVD combo yourself. There are no
user-serviceable parts inside. Turn off your TV/DVD combo, unplug the
power cord, then contact an authorized service center.
Specifications
Design and specifications are subject to change without notice.
Dimensions and weight are approximate.
Problem Solution
Cannot tune to
one or more
channels • The program you want to watch may be
blocked through the parental controls. For
more information, see “Setting parental
control levels” on page 18 or “Changing
parental control settings” on
page 17.
• The channel may have been deleted from the
channel list. You can tune to the channel by
pressing the number buttons or you can add
the channel back to the channel list. For more
information, see “Changing channel settings”
on page 14.
Password is lost • On the Parental Controls menu (TV), enter
9443 for the password, then set a new
password. For more information, see “Setting
parental controls” on page 18.
• On the Parental menu (DVD setup) enter 1369
for the password, then set a new password. For
more information, see “DVD system setup” on
page 24.
Cannot access
some items • If a setting or option is grayed out, it is not
available in the current input mode.
TV cabinet creaks • When you are using your TV, the temperature
inside the cabinet increases. This causes the
cabinet to expand or contract, which produces
the creaking noise. This is not a malfunction.
Buttons do not
work • Unplug the power cord for a few seconds,
then plug it back in and turn on your TV.
Model 19”
Picture/sound system NTSC, ATSC, Clear QAM
Audio output
≥ 3W+3W
External input ports AV input, PC input, S-VIDEO input, PC audio
input, YPbPr input, Antenna input, HDMI input,
AUDIO in, headphone, USB for Service
Power requirements 120 V~60 Hz
Power consumption 50 W
Temperature Working: +41°F~+95°F (+5°C~+35°C)
Storage: +5°F~113°F (-15°C~+45°C)
Humidity Working: 20%~80%
Storage: 5%~90%
Dimensions 18.5 Ч 7.5 Ч 15.2 inches
(47.1 Ч 19.0 Ч 38.5 cm)
Weight 10.8 lbs. (4.9 kg)
Accessories Remote control
Batteries (AA x 2)
Component cable
User Guide
Quick Start Guide
DX-LDVD19-10A_09-0340.book Page 26 Tuesday, April 28, 2009 4:43 PM