Dynex DX-LDVD19-10A - Manual (Page 16)

12
Understanding the basics DX-LDVD19-10A
Notes:
Depending on the signal source selected, you may see different options on
your screen. The above menus are shown in TV mode.
Menu items that are not selectable are grayed out. Menus in this manual
are described in TV mode, unless otherwise indicated.
The illustrations and screens shown in the manual are for explanation
purposes and may vary from the actual screens on your TV.
Navigating the menus
Selecting a channel
To select a channel:
• Press CH+ or CH- to go to the next or previous channel on the
memorized channel list.
• Press the number buttons to enter the analog or digital (main)
channel number you want, then wait for the channel to change,
or press ENTER to change the channel immediately.
• To select a digital sub-channel, press the number buttons to
select the main digital channel, then press the dot (.) button
to select the sub-channel. Wait for the channel to change, or
press ENTER to change the channel immediately.
Note: Button presses must be within three seconds of each other.
• Press RECALL to go to the last channel viewed.
• Press CH.LIST to display a list of memorized channels,
press CH+ or CH- select the channel you want from the list, then
press ENTER/VOL+ to go to that channel.
• Press FAVORITE to display a list of your saved favorite channels,
press CH+ or CH- to select the channel you want from the list,
then press ENTER/VOL+ to go to that channel.
Note: If either list has more than one page, press CH+ or CH- to scroll
through the pages.
Digital sub-channels
A digital TV signal transmits more data than an analog signal. This
increase in data provides a better picture and sound with less static and
interference. The increased data capacity also lets broadcasters fit
several channels into the same bandwidth as an analog signal.
Broadcasters may use these sub-channels to transmit a variety of
information, such as weather forecasts, foreign languages, and
commercials. A digital sub-channel is indicated by the main channel
number, followed by a dot, then the sub-channel number. For example,
5.1 indicates sub-channel 1 of main channel 5.
Adjusting the volume
To adjust the volume:
• Press VOL+ or VOL– to increase or decrease the volume.
• Press MUTE to temporarily turn off all sound (except the
headphones). Press MUTE again to restore the sound.
Adjusting basic settings
To adjust basic settings:
1 Press MENU. The on-screen menu opens with the Picture menu
displayed.
2 Press VOL+ or VOL– to highlight Settings, then press
ENTER/CH–. The Settings menu opens.
3 Press CH+ or CH– to highlight an option, then press
ENTER/VOL+ to enter the sub-menu. You can select:
• Parental Controls—Lets you control which
programs/movies your children can watch, based on industry
ratings.
• Closed Caption—Lets you turn closed captioning on or off.
Also lets you set closed caption options.
• Time—Lets you set the clock and the sleep timer.
• Menu Settings—Lets you set menu language and menu
transparency.
• Input Label—Lets you label a device connected to your
TV’s input jacks.
• Computer Settings—Lets you adjust picture settings to
optimize a computer display.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
CH+
CH-
VOL
-
VOL
+
ENTER
CH+
CH-
VOL
-
VOL
+
ENTER
CH+
CH-
VOL
-
VOL
+
ENTER
Press to display the main menu.
Press to select menu items, to adjust selected
items, or move on-screen cursor left or right.
Press to select the menu items.
Press to confirm your selection or enter a
sub-menu.
Press to return to the previous screen.
Press to close the menu.
EXIT EXIT
Custom
40
60
45
R5
+5
CHANNELS SETTINGS
MOVE SELECT PREVIOUS ENTER MENU
PICTURE
Picture
AUDIO
Mode
Brightness
Sharpness
Contrast
Color
Tint
VOL -
CH+
CH-
VOL +
MOVE SELECT PREVIOUS EXIT ENTER MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS
Settings
Parental Controls
Closed Caption
Computer Settings
Time
Menu Settings
Input Labels
VOL -
CH+
CH-
VOL +
DX-LDVD19-10A_09-0340.book Page 12 Tuesday, April 28, 2009 4:43 PM