Dynex DX-LDVD19-10A - Manual (Page 17)

Adjusting the picture
13
DX-LDVD19-10A
Displaying additional information
To display additional information:
• Press INFO to show an information banner. The information
banner shows current program information such as channel
number, video input source, and resolution.
• Digital mode information—Displays channel number,
station name, channel label (if preset), broadcast program
name, TV rating, signal type, audio information, resolution,
current time, and current program start and end times.
• Analog mode information—Displays channel number,
channel label (if preset), signal type, and audio information.
• Press GUIDE to display EPG OSD of the channel, including
program name. channel number, program description, channel
label, TV rating, digital closed caption, and program show time.
Adjusting the picture
Adjusting the TV picture
To adjust the picture:
1 Press MENU. The on-screen menu opens with the Picture menu
displayed, then press ENTER/CH- . The Picture menu opens.
2 Press CH+ or CH– to highlight an option, then press
ENTER/VOL+ to enter the sub-menu. You can select:
• Mode—Selects the picture mode - Vivid, Standard,
Energy Savings, Theater, Sports, or Custom. You can
also press PICTURE on the remote control to select the
picture mode.
• Brightness—Adjusts the brightness.
• Contrast—Adjusts the contrast.
• Color—Adjusts the color saturation.
• Tint—Adjusts the image tint.
• Sharpness—Adjusts the sharpness.
• Advanced Video—Lets you set the following:
• Aspect Ratio–Select Normal, Zoom, Wide, Cinema,
or Auto Zoom.
• Overscan–Turn this On to adjust the picture’s
reproduction rate when receiving DVI signals in VIDEO
format. Available when the signal uses EIA timing
(480i/480p/720p/1080i/1080p).
• Color Temperature–Select Warm (increased red),
Normal, or Cool (increased blue).
• Backlight–Adjusts the overall brilliance of the
screen.
• Noise Reduction–Selects the noise reduction mode to
reduce picture noise (snow). Choose High, Middle,
Low, or Off.
• Advanced Contrast–Turn this On to optimize the
picture display for a more vivid image.
• Reset Picture Settings—Resets all picture settings to
factory default.
Note: You can only adjust Brightness, Contrast, Color Temperature, Tint,
and Sharpness if you set the Mode to Custom.
3 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Adjusting the computer image
To adjust the computer image:
1 Make sure that your TV is in VGA mode. For more information, see
“On-screen menu overview” on page 11.
2 Press MENU. The on-screen menu opens.
3 Press VOL+ or VOL– to highlight Settings, then press
ENTER/CH–. The Settings menu opens.
4 Press CH+ or CH– to highlight Computer Settings, then press
ENTER/VOL+. The Computer Settings menu opens.
5 Press CH+ or CH– to highlight an option, press ENTER/VOL+ to
open the sub-menu, then press V0L+/- to adjust. You can select:
• Auto Adjust—Automatically adjusts the image settings,
such as position and phase
• H-Position—Moves the image right or left
Program Name
2.1 WGBH-SD
TV-Rating TV-14 CS
No Program Info
Prev. 3-9 2010 11:00AM-12:00PM Next
Program name
Program show time
Channel Number
Program description
Channel label
Program
date
TV rating
Digital closed caption
EXIT EXIT
Custom
40
60
45
R5
+5
CHANNELS SETTINGS
MOVE SELECT PREVIOUS ENTER MENU
PICTURE
Picture
AUDIO
Mode
Brightness
Sharpness
Contrast
Color
Tint
VOL -
CH+
CH-
VOL +
EXIT EXIT
Custom
40
60
45
R5
+5
CHANNELS SETTINGS
MOVE SELECT PREVIOUS ENTER MENU
PICTURE
Picture
AUDIO
Mode
Brightness
Sharpness
Contrast
Color
Tint
VOL -
CH+
CH-
VOL +
MOVE SELECT PREVIOUS EXIT ENTER MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS
Settings Computer Settings
Parental Controls
Closed Caption
Computer Settings
Time
Menu Settings
Input Labels
VOL -
CH+
CH-
VOL +
Auto Adjust
H. Position
V. Position
Phase
Reset Computer settings
50
50
29
MOVE SELECT PREVIOUS EXIT ENTER MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS
Settings Computer Settings
Clock 50
VOL -
CH+
CH-
VOL +
DX-LDVD19-10A_09-0340.book Page 13 Tuesday, April 28, 2009 4:43 PM