Dynex DX-LDVD19-10A - Manual (Page 27)

DVD Playback
23
DX-LDVD19-10A
4 Press CH+ or CH– to highlight an option, then press VOL+ or
VOL– to change the setting. Options include:
• Input–To select the input to label.
• Label–To select the label. Options include:
• Custom–Select this option to input your own label.
• VCR
• DVD
• Set Top Box
• Satellite
• Cable Box
• Game
• PC
• Custom–To enter a custom label. Press VOL+ or VOL– to
move between fields and press CH+ or CH– to select the
number of symbol you want (up to ten) to label the input.
Press ENTER to confirm.
• Reset Input Labels–To reset all input labels to factory
default.
5 Repeat Step 4 to enter additional labels.
6 Press MENU to return to the previous menu, or press EXIT to
close the menu.
DVD Playback
Basic playback
To load and play a DVD:
1 Press DVD on the remote control to enter DVD mode.
2 When the TV displays “OPEN,” place a DVD in the disc slot with
the label facing the back of the TV.
The disc is loaded automatically after one to two seconds, then
the DVD player reads the DVD and displays the opening menu. (If
there is no disc placed in the DVD slot, “OPEN” will remain on the
screen.)
3 Press the cursor buttons on the remote control to select menu
options, then press PLAY/ENTER to start playback. You can also
press the digit buttons to select a menu option directly, though
some DVDs do not allow this during startup. During playback you
can:
• Press PAUSE to pause playback (still mode). The sound is
muted during still mode.
• Press PLAY/ENTER to resume normal playback.
• Press FWD
to fast forward through the disc. Each time
FWD is pressed, the fast forward speed changes.
• Press PLAY/ENTER to resume normal playback.
• Press REV
to fast reverse through the disc. Each time
REV is pressed, the fast reverse speed changes.
• Press PLAY/ENTER to resume normal playback.
• Press PREV
to repeat the current chapter. If you press
within two seconds of when the current chapter begins, it
will move to the last chapter until the start of the disc is
reached.
• Press NEXT to skip the current chapter and play the next
one.
• Press STOP to stop playback. The TV screen shows the
start logo. With some discs, such as DVDs or CDs, the player
can resume playback from the point where it was stopped.
4 Press PLAY/ENTER to resume playback from the location where
the playback was stopped.
5 Press STOP twice to stop completely.
Advanced playback
All described functions can be activated by pressing the indicated
button on the remote control. These functions are for DVDs. If you play
other disc formats, the operation and on-screen display are different.
SUBTITLE—Press this to select a subtitle from the available
languages. The screen displays "SUBTITLE 01/XX", where "01" indicates
the ordinal number of the language, "XX" indicates the total number of
languages available. (The number of language available depends on
disc.) This function can select up to 32 languages, if available.
REPEAT—Press to repeat a portion of the DVD.
• Press once to repeat the current chapter (“CHAPTER” is be
displayed on screen).
• Press twice o repeat the current title (“TITLE” is displayed on the
screen).
• Press three times to repeat the entire DVD (“ALL” is displayed on
the screen).
• Press a fourth time to cancel the repeat function.
A-B—Press to repeat a selected portion of a DVD. Press once to set a
starting point, press again to set an end point and complete the set up.
The selected section will be repeated. Press a third time to cancel this
function.
ANGLE—When enjoying sports, concert, or theatre, press this key to
view the DVD from different angles (when available).
MENU—Press this key to display the DVD root menu.
DISPLAY—Pressing this key cycles through information about the
DVD, including Title Elapsed, Title Remaining, Chapter Elapsed, Chapter
Remaining, and Display off.
PROGRAM—Press to enter program mode, then press the number
buttons to select the program number that you want. When finished
move the cursor to select START, then press PLAY/ENTER to confirm
and start the program playback.
T.SEARCH—Press once to display the search menu for chapter search.
Enter a chapter number to go to that chapter. Press T-SEARCH twice for
time search. Enter hour, minute and second number to go to that spot.
Press the program number buttons to input the item you want, then
press PLAY/ENTER to confirm.
SLOW—Press to play a disc in slow motion. Each time the button is
pressed, the slow motion speed changes. Press PLAY/ENTER to resume
normal playback.
Note: This function does not work for CDs.
TITLE—Pressing this key displays the title menu on some DVDs. You
can then use the number buttons to select the item you prefer.
AUDIO—Press to cycle between Mono Left, Mono Right, Mix-Mono,
and Stereo audio modes.
JPEG disc playback
A JPEG disc contains JPEG (.jpg) format picture information that can be
decoded by software and displayed through the video output interface
or on the television screen.
This function has many applications. For example, you can save files
from a scanner or digital camera in the JPEG format, record these on a
CD-R disc and present them to an audience through this player.
The JPEG format is a convenient method to store images in a small
amount of memory space, and is ideal for archiving information.
When a disc containing standard JPEG picture files is inserted into the
player, a navigation menu is displayed automatically. Use the (up)
and (down) cursor buttons to select a file then press PLAY/ENTER to
begin a slide show.
DX-LDVD19-10A_09-0340.book Page 23 Tuesday, April 28, 2009 4:43 PM