SkyRC SKYRC1000W Charger - Manual (Page 5)

SPECIAL FEATURES
Optimized Operating Software
Ultimate 1000W features the so-called AUTO function that set the feeding current during the
process of charging or discharging. Especially for lithium batteries, it can prevent the
overcharging which may lead to an explosion due to the user's fault. It can disconnect the
circuit automatically and alarm once detecting any malfunction. All the programs of this product
were controlled through two way linkage and communication, to achieve the maximum safety
and minimize the trouble. All the settings can be configured by users!
Battery Memory (Data Store/Load)
The charger can store up to 10 different charge/discharge profiles for your convenience. You
can keep the data pertaining to program setting of the battery of continuous charging or
discharging. Users can call out these data at any time without any special program setting.
Terminal Voltage Control(TVC)
The charger allows user to change the end voltage. (for expert user only)
PC Control Software “Charge Master”
The free “Charge Master” software gives you unparalleled ability to operate the charger through
the computer. You can monitor pack voltage, cell voltage and other data during the charging,
view charge date in real-time graphs. And you can initiate, control charging and update
firmware from “Charge Master”.
Internal Independent Lithium Battery Balancer
Ultimate 1000W employs an individual-cell-voltage balancer. It isn't necessary to connect an
external balancer for balance charging.
Balancing Individual Cells Battery Discharging
During the process of discharging,
can monitor and balance each cell of the
battery individually. Error message will be indicated and the process will be ended automatically
if the voltage of any single one cell is abnormal.
Ultimate 1000W
Adaptable to Various Type of Lithium Battery
Ultimate 1000W is adaptable to various types of lithium batteries, such as LiPo, LiIon and the
new LiFe and LiHV series of batteries.
03 · Ultimate 1000W
Smart Phone Control via Wi-Fi Module (both iOS and Android)
Finally, your charger gets its own apps. This charger can be controlled and operated by smart
phones via Wi-Fi module(option part SK-600075).
Balance Port for Lithium Battery Charging
For some small batteries without main connector, you could use the battery socket to charge
and discharge the battery to storage status.
LiHV Mode Available
The additional LiHV mode is able to charge the new generation of LiPo batteries with an
end of charge voltage of 4.35 V.