SkyRC SKYRC1000W Charger - Manual (Page 3)

Congratulations on your choice of SKYRC Ultimate 1000W Balance
Charger/Discharger. This unit is simple to use, but the operation of a
sophisticated charger such as SKYRC Ultimate 1000W does require some
knowledge on the part of the user. These operating instructions are designed
to ensure that you quickly become familiar with its functions. It is therefore
important that you read right through the Operating Instructions, Warning and
Safety Notes before you attempt to use your new charger for the first time.
We hope you have many years of pleasure and success with your new battery
charger.
SKYRC Ultimate 1000W features with high efficiency with synchronous
rectification technology. It also has some new features and functions. Users
could set the terminal voltage by themselves and connect it to PC for PC
control and firmware upgrade. What's more, users could also use it as
Lithium Battery Meter and Lithium Battery Internal Resistance Meter. There
are Automatic Charging Current Limit, Capacity Limit, Temperature
Threshold and Processing Time Limit which makes the charger safe to use.
Ultimate 1000W employs the circuit that features output power of 1000
watts. It can charge 20 cells of NiCd/NiMH or 8 series of Lithium batteries
with maximum current of 40A. Ultimate 1000W has an individual cell voltage
balancer, so it does not required any balancer separately when charging
Lithium batteries (LiPo/LiIon/LiFe) for voltage balancing.
Reliable/durable membrane button systems are using for charger controls.
The fan cooling system is so smart and efficiently. The fan speed is
controlled by internal temperature sensor.
Please BE SURE to read these INSTRUCTIONS, WARNING and SAFETY
NOTES before you use the charger for the first time.
It can be dangerous to mis-handle batteries and battery chargers, as there is
always a risk of batteries catching fire and exploding.
INTRODUCTION
01 · Ultimate 1000W