SkyRC 6x80+ Blue Version Charger - Manual (Page 15)

TVC=YOUR RISK
4.20V
SAVE PROGRAM
SAVE
SAVE PROGRAM
ENTER
＞3 seconds
BATT MEMORY 【1】
LiPo 7.4V(2S)
BATT MEMORY 【1】
C:4.9A D:2.2A
ENTER CHARGER
LOAD……
next flash
TEMPERATURE
CUT-OFF 50C
Set the terminal voltage, which can be
adjusted(4.18-4.30V).
Save the program set by pressing and holding
the Start/Enter dial for 3 seconds.
This screen indicate the saved profile.
This screen indicates that the charge profile is
being loaded.
Once you've saved a charge profile, you can
load those settings to use later. To load a
memory, you have to press and hold the
Start/Enter dial for 3 seconds. Otherwise you
only enter the setting mode.
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
BATTERY MEMORY SET
Press
Dial
Set the cut-off temperature, which can be
adjusted(20 C/68 F-80 C/176 F).
26 27 6X80 Plus 6X80 Plus
LITHIUM BATTERY METER
PROGRAM SELECT
Li BATT METER
Press the Start/Enter dial to enter the Lithium
Battery Meter program.
4.19 4.15 4.18V
0.00 0.00 0.00V The screen indicate each cell's voltage.
MAIN 12.52V
H4.190V L4.160V
The screen indicate the total voltage, the highest
voltage, the lowest voltage.
SELECT
The user can check battery's total voltage, the highest voltage, the
lowest voltage and each cell's voltage.
Please connect the battery to the charger main battery lead to battery
socket and balance wires to balance socket.
This diagram shows the correct
way to connect your battery to
check the voltage.
Press
Dial