Sioux Tools Air Tools - Manual (Page 12)

12
Scalers and chippers can create sparks that can ignite flammable materials or vapors.
Area must be free of combustible or explosive materials or vapors.
Explosions and fires can cause injury.
Chisels can come loose when running if not against work surface.
Never point a running tool at any person.
Chisels not retained can cause injury.
When using a scaler or chipper, sudden and unexpected tool movement can occur.
Be sure your body position allows you to have control of the tool at all times. Make sure
your footing is secure.
Sudden and unexpected tool movement can cause injury.
Tools left connected to the air supply while making adjustments, changing accessories, or doing
any maintenance or service on tool can start unexpectedly.
Always remove tool from air supply and activate trigger to bleed air line before making
any adjustments, changing accessories, or doing any maintenance or service on tool.
Tools starting unexpectedly can cause injury.
Chipping and scaling operations can create dust
Do not breath this dust. Use an approved mask.
Breathing dust can cause injury.
Chipping chisels and scaling needles can break.
Do not grasp the chisel or the needles directly
Broken chisels and needles can cause injury.
Chipping chisels and scaling needles vibrate.
Do not grasp the chisel or the needles directly
Exposure to vibration can cause injury.