Sioux Tools Air Tools - Manual (Page 11)

11
SAFETY INSTRUCTIONS FOR AIR DRILLS
Drilling creates chips.
Proper eye protection must be worn at all times by tool user and bystanders.
Chips can cause eye injury.
Drill bits can break.
Proper eye protection must be worn at all times by tool user and bystanders.
Broken drill bits can cause eye injury.
When using a drill, sudden and unexpected tool movement can occur:
• When the drill bit breaks through the material being drilled.
• If the tool stalls because of being pushed too hard.
• If the bit snags on the material being drilled.
Be sure your body position allows you to have control of the tool at all times. Make sure
your footing is secure.
Sudden and unexpected tool movement can cause injury.
Tools left connected to the air supply while making adjustments, changing accessories, or doing
any maintenance or service on tool can start unexpectedly.
Always remove tool from air supply and activate trigger to bleed air line before making
any adjustments, changing accessories, or doing any maintenance or service on tool.
Tools starting unexpectedly can cause injury.
SAFETY INSTRUCTIONS FOR AIR SCALERS AND CHIPPERS
Scalers and chippers can cause flying particles.
Proper eye protection must be worn at all times by tool user and bystanders.
Wear protective clothing and gloves to protect body and hands.
Flying particles can cause eye, body, and hand injury.
Scalers and chippers can break.
Proper eye protection must be worn at all times by tool user and bystanders.
Broken chisels and needles can cause eye injury.