RAVE Sports Slidewalk - Manual (Page 6)

5
Inflating any RAVE Aqua Attachment
We highly recommend using the RAVE High Speed
Inflator/Deflator. It will provide rapid
inflation/deflation and will achieve optimum air
pressure in your RAVE product. (Part # 01083 not
included).
To lock open valve, depress the stem and
rotate ¼ turn clockwise. To close valve,
depress the stem and rotate ¼ turn
counter-clockwise. The valve stem should
be in the depressed position while
inflating. Replace cap on valve after
inflation to ensure air tight seal.
If you are using the RAVE Sports High Speed
Inflator (Part #01083), simply lock the adaptor
onto the end of the inflation hose and insert
into the valve body. Turn ¼ turn to lock in
place.
NOTE: This inflation adaptor will
automatically open the valve when inserted
and will close the valve when removed. You do not need to
manually open/close the valve when using this special adaptor.
If you will be using a shop vacuum or other
inflation device with a larger nozzle, use the 1-¼”
diameter coupler (included) between the valve
adaptor and the hose of your inflator. Make sure
the hose is attached to the blower port of
the vacuum for inflation. Insert the adapter
into the air valve and lock into place by
turning clockwise.
OPEN
CLOSE
Adaptor Coupler