RAVE Sports Slidewalk - Manual (Page 15)

14
Center the Log on one side of the Aqua Jump. DO
NOT PLACE ON THE SIDE WHERE THE VALVE IS
LOCATED. Wrap the straps around the tube and
buckle tightly .
Attaching the Aqua Log to a Bongo
Run the bottom two straps under the Bongo
and the top two straps over the top of the
Bongo. Note: the top two straps should run
through the semi-circular cut-outs on the lacing
apron as shown.
When properly installed, there will be two
cutouts between the straps.
Step 3
Before you use your Aqua Log, you need to attach at least one
anchor to keep it from moving while you use it. Attach anchor line
(not included) securely to the O-ring at the end of the Aqua Log and
attach anchor to the anchor line. We recommend the RAVE Sports
Anchor Bag. (Part #20346). The Aqua Log is now ready to use.