RAVE Sports Slidewalk - Manual (Page 21)

20
Repairs
For large holes, tears or seam failures, contact RAVE Sports at 1-800-
659-0790. Additional repair patches can be found online at
www.ravesports.com. For minor holes or tears:
• Inflate the product and locate the leak by spraying the tube
with mild soapy water.
• Determine the hole size and cut a patch 1-2 inches wider than
the diameter of the hole. Make sure all corners of the patch are
rounded.
• Deflate the product and clean the patch and area around the
hole with rubbing alcohol. Let dry completely.
• READ AND UNDERSTAND THE WARNINGS ON THE GLUE
CONTAINER.
• Apply glue to the patch and the area around the hole. Let the
glue dry until it is tacky to the touch.
• Lay the product on a flat, hard surface and apply the patch.
Working from the center to the outer edge, rub out any air
bubbles between the patch and the product.
• Let patch dry for 24 hours before attempting to inflate the
product