RAVE Sports Slidewalk User Manual

Page 10

Step 3

Determine the preferred location for the Slide on

the Aqua Jump Eclipse. Make sure the pad is

oriented so the one section with slots is oriented

to match the preferred Slide location on the Aqua

Jump Eclipse tube.

Step 4

Starting from the inside of the tube, feed both

ends of one buckle strap through the Δ-ring

closest to the corner of the tube on the section

you want the Slide to be attached. Wrap the long

strap around the outside of the inflated tube and

fasten to the buckle on the inside. Pull the strap

tight, ensuring the buckle is up tight to the Δ-ring.

IMPORTANT: Rotate the strap around the tube

until the buckle is touching the backside of the

Δ-ring as shown.

Step 5
Repeat procedure for the second strap. Properly positioned, both

attachment straps for the Slide will be on the same colored panel on

the Aqua Jump tube Eclipse and running through the outermost

triangle rings on that panel.

Step 7
Feed the short strap up through corresponding