PRW 33 PQ Series Aluminum SB Ford Shaft Mount Rocker - Manual

PRW Industries, Inc.
1722 Illinois Avenue
Perris, California 92571
Tele: (951) 436-7900
Tech: (888) 377-9779
Shaft Mount Rocker Arm System Installation
Instructions
Small Block ford SVO/oem & aftermarket Cylinder Heads
STOP!! IF YOUR CYLINDER HEAD IS NOT LISTED BELOW;
Do not attempt to install THIS SYSTEM!!
Manufacturer Compatible Cylinder Heads
Ford SVO Windsor / GT 40
AFR SBF 225cc Outlaw Race Heads
RHS Cylinder Heads Pro-Action
Edelbrock Performer / Victor Jr.
PN: 3330201 & 3330202 Parts List
Item Quantity
Rocker Arm Stands/Pedestals 2 each
Rocker Arms (Pairs) 8 each
5/16"-18 x .8200" Rocker Arm Stand Bolts, Low Head Torx,
T45, for OEM-style Cylinder Heads Call PRW Cust Svc if
Required
7/16”-14 x .8750 Rocker Arm Stand Bolts, Low Head Torx,
T45, for Aftermarket-style Cylinder Heads 16 each
5/16” Rocker Arm Shaft Bolts
24 each
3/8” Valve Lash Adjusters
16 each
3/8” 12 Point Adjuster Nuts
16 each
Stainless Steel Adjuster Washers 16 each
Rocker Stand Shims ( 3 Thicknesses) 8 each
3/8” Drive Torx Drivers (T-45 & T-50)
1 each
Push Rod Length Checker 2 each
Extreme Pressure Lube #3 1 each – ¼ oz tube
Thank you for purchasing a Performance Quotient® product. PQ
2
Series Shaft Mount Rocker Arm
Systems are engineered and manufactured by PRW Industries, Inc. to maximize valvetrain efficiency for
many popular Chevrolet and other GM, Ford, and Mopar performance aftermarket and racing cylinder
heads. CNC machined billet steel pedestals, centerless ground steel alloy rocker shafts, PRW aviation
quality fasteners, and needle roller bearings comprise the foundation of PQ
2
rocker arms and related
systems.
PQ
2
Shaft Rocker Arm System Preparation:
Please read these instructions carefully before beginning your installation. Also, take a moment to review
the limited warranty information. If there are any questions or problems during the installation, please do
not hesitate to contact the PRW Customer Service Hotline at 1-888-377-9779, between the hours of 7
a.m. and 5 p.m. PST Monday through Friday.
1) Confirm that all parts are included by comparing to the parts list.