Pitney Bowes DM1000 - Manual (Page 4)

Alerting Messages
Various messages are used throughout this guide to alert you to potentially hazardous or error caus-
ing conditions. These messages are as follows:
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
interference when the equipment is operated in a commercial environment. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause interference to radio communications. Operation of this equip-
ment in a residential area is likely to cause interference, in which case the user will be required to cor-
rect the interference at his own expense.
Use only a shielded interface cable to operate this equipment with a scale or other peripheral device
WARNING!
Alerts you to conditions or practices that could cause serious injury.
CAUTION:
Alerts you to conditions or practices that could cause damage to the
equipment or to the material being run.
IMPORTANT:
Alerts you to conditions or practices that could adversely affect equipment operation if
instructions are not followed exactly.
NOTE:
Provides a comment or explanation of the associated topic.
CAUTION:
Changes or modifications to this equipment not expressly
approved by the party responsible for compliance (Pitney Bowes) could void
the user’s authority to operate the equipment.