Pitney Bowes DM1000 User Manual

Page 171

DM1000™ Digital Mailing System Operating Guide

SV60951 Rev. B

12-3

Optimum Performance (Throughput)

* Model numbers are on labels located under the main cover on the real panel of your mailing system.

The actual throughput of the system varies depending on the material processed, system condition,

and operator skill.
• Gummed tape throughput 35-40 tapes per minute, depending on the model.

• Adhesive tape throughput is 40 tapes per minute with meter stamp only and 35 tapes per minute

with advertisements and inscriptions.

Ink Capacity

45,000 pieces with no advertisements, permits, or inscrip-

tions

30,000 pieces with advertisements, permits, or inscriptions

1.5 years shelf/installed life

Ink Usage Messages

•

Order Ink -

This message indicates that there are

approximately 10 days of ink remaining. This message

is drop count controlled and calculated by a chip within

the print head carriage.

•

Low Ink -

This message indicates that there are approx-

imately 2 days of ink remaining. This message is drop

count controlled and calculated by a chip within the print

head carriage. Approximately 5 days of printing remain

before the Ink Out message appears.

•

Ink Out -

When this message appears, the mailing

machine stops. This function is controlled by the S2

sensor needles that protrude into the bottom of the ink

cartridge.

Internal Modem

56 Kbytes/sec

Telephone Cord for Analog Line

26 AWG or smaller