Pitney Bowes DM1000 - Manual (Page 23)

DM1000™ Digital Mailing System Operating Guide
SV60951 Rev. B 2 - 7
Mailing System
Interior Rfer to the diagram for the location of each component.
Roll tape
- The tape supply is located here. Print meter stamps
on tape for pieces of mail that cannot go through the system. You
can also print reports on tape.
Printer and Ink Cartridge
- Produces the meter stamp on the
mail piece or tape.
Transport Jam Lever
- Lift this to clear jams on the transport
section of the feed deck.
Feeder Jam Release Lever
- Lift this to clear jams in the feeder
section of the feed deck.
Light Mail/Postcard Selection Knob
- Applies pressure to
envelopes to ensure proper sealing.
Thickness Adjustment Knob
- Use this to adjust for the thick-
ness of the envelopes.
E-Z Seal® Sealing Solution Moistener Bottles -
Hold the E-Z
Seal® Sealing Solution used to seal mail and tapes.
External Device Ports
- Use these ports to connect to external
devices like a power stacker.
1
2
3
4
5
6
7
8