Parr Instrument 6400 - Manual (Page 70)

9
Memory Management
P a r r I n s t r u m e n t C o m p a n y 68
c
haPter
9
Memory Management
The 6400 Calorimeter will hold data for 1000 tests
in its memory. These tests may be pre weights,
preliminary or final reports for either standardiza-
tion or determination runs. Once the memory of the
controller is filled, the controller will not start a new
analysis until the user clears some of the memory.
Clearing Memory
The FILE MANAGEMENT key on the main menu
leads to the file management sub-menu. The RUN
DATA FILE MANAGER key leads to a listing of the
files.
• Single files can be deleted by highlighting the
file and pressing the DELETE key. The controller
will then ask the user to confirm that this file is
to be deleted.
• A series of files can be deleted by selecting the
first file in the series and then the last file in
the series using the EXTEND SEL key and then
pressing the DELETE key.
Removable SD Memory
The controller of the 6400 Calorimeter can accept
SD memory cards, Parr part number 2201E. These
cards can be used to:
• Copy test file data for transfer to a computer
• Copy user settings for back up
• Reload user settings to the controller
• Restore or update the controller’s operating
system.
• Copy the log file
SD memory cards are inserted into either slot on the
back of the control section of the Calorimeter. Keys
are provided on the FILE MANAGEMENT sub-menu
to initiate each of the above actions except restoring
or updating the controller’s operating system and
copying the log file.