Mossberg 715T - Manual (Page 9)

9
Fig. 6
Fig. 7
KEEPING THE BOLT IN THE “OPEN” POSITION
If the magazine is not installed, pull the operating handle fully rearward then push
the handle inward. To release the bolt, pull the end of the operating handle to the
rear and outward to release.
If an empty magazine is installed, the magazine follower will keep the bolt in an
open position. (Fig. 6) To remove the magazine, follow the instructions for your
particular model in “To Remove Clip Magazine” section of this manual.
Magazine Follower
135055_PN 17925 Rev E.indd 9 1/4/13 9:57 AM