Mossberg 715T - Manual (Page 4)

GENERAL INFORMATION AND MECHANICAL CHARACTERISTICS
The 702 Plinkster® (including 715T models) is designed to operate with .22 long
rifle cartridges of sub-sonic, standard, high or hyper velocities only.
When the firearm leaves the factory, its metal parts are protected by a coat of very
adherent oil. This coating, especially inside of the barrel, must be removed before
using the firearm. The oil on the outside surfaces should also be removed when
the packing box has been open because the oil is very sticky and it easily retains
dust and other solid impurities from the air.
The firearm is designed to fire semi-automatically. Finger pressure must be
relieved from the trigger before an additional shot can be fired.
WARNING
Because this firearm can be used as a single shot, it will fire whether
or not a magazine is in the firearm if a cartridge is chambered.
FIREARM WILL FIRE WITH MAGAZINE OUT.
4
135055_PN 17925 Rev E.indd 4 1/4/13 9:56 AM