Konig Electronic Outdoor IP camera remote video surveillance - Manual (Page 7)

ENGLISH
7
9
Please enter a camera name and password for security and select
the tab:
(see “Figure 13”).
The IP camera will automatically enter the viewing screen
(see “Figure 14”).
Figure 11
Figure 13
Figure 12
Figure 14
Start up the IP camera after the Wi‑Fi connection has been completed
1
Power On
Plug the power adapter DC connector into the DC input port of the
IP camera and then plug the power adapter into a wall outlet. The
status LED on the IP camera will turn green for about 15 seconds.
2
Programme Loading
The status LED will flash red for about 15 seconds.