beautypg.com

Kipp&Zonen UVS-E-T UV Radiometers User Manual

Page 18

background image

6.1.4 Non-stability Interpolation

Enabling

Non-stability Interpolation will instruct the program to linear interpolate the non-stability factor (ρ) between each

DCC instead of changing it abruptly between DCCs. Note that this feature is only useful for correcting UV measurements before
the last re-calibration date.

When

Non-stability Interpolation is enabled, you can also enter Radiometer Not Used periods. During such a period linear

interpolation of the non-stability is stopped and remains constant, as the radiometer does not age when it is not used. A
Radiometer Not Used period is defined is a radiometer that is not powered on and does not receive radiation. Radiometer Not
Used
periods can be added and removed by pressing the Add and Remove Period buttons. Editing is initiated by double-clicking.

In order to monitor the non-stability factor, enable the

Non-stability Factor column on the Output page.

Example

18

UVIATOR software manual