Denon ASD-3N - Manual (Page 21)

ENGLISH
Get
ting Star
ted
Connections
Pla
ybac
k
Inf
or
mation
Tr
oubleshooting
GUI
Make GUI related settings.
Setup
GUI
a Screensaver
s Format
d GUI time out
[Selectable items] ON OFF
NOTE
When a format other than the video format of the
connected monitor is set, the picture will not be
displayed properly. Use the procedure described
below to change the video format.
Operating from the Remote
Controller
G Set to NTSCH
• Press and hold the TOP MENU and PAGEu buttons for
at least 3 seconds.
“NTSC” is set.
G Set to PALH
• Press and hold the TOP MENU and PAGEi buttons for
at least 3 seconds.
“PAL” is set.
Always 30s 10s
[Selectable items]
NTSC PAL
[Selectable items]
a Screensaver
Make screensaver settings.
Use the screensaver to prevent burn-in on
the monitor screen.
When set to “ON”, the screensaver is
activated if there is no activity for about 3
minutes.
s Format
Select the video output signal format to
match the monitor.
d GUI time out
Set the GUI display time when not
operating.
b Normally there is no need to set this.
Set
up
Language
This sets the language used
on the display screens
Setup
Language
English Deutsch Français
Español
[Selectable items]