Dynex DX-LCD37-09-2 - Manual (Page 7)

Features 7
Right side buttons Back jacks
# Button Description
1 CH /CH Press to go to the next or previous
channel in the channel list.
2 VOL /VOL Press to increase or decrease the volume.
3 MENU Press to open the on-screen menu.
4 INPUT Press to select the video input. For more
information, see “Selecting the video
input source” on page 14.
5
(power)
Press to turn your TV on or off. When you
turn off your TV, it goes into standby
mode.
# Jack Description
1 AC POWER Connect the power cord to this
jack.
2 Headphone Connect headphones to this jack.
3 HDMI 1/HDMI 2 Connect HDMI devices to these
jacks.
4 VGA PIC/AUDIO Connect a computer to these
jacks.
5 COMPONENT IN1
COMPONENT IN 2 Connect component video
devices to these jacks.
6 S-VIDEO/AV
INPUT Connect an S-Video or AV device
to one of these video jacks, then
connect the audio to the adjacent
audio jacks.
7 AV OUT Connect a VCR for recording to
these jacks.
8 RF Connect an antenna or cable TV
to this jack.
9 RS-232 For service only. Do not use.
10 S/PDIF OUT Connect to a digital audio system.
1
2
3
4
5
6
7
8
10
9