Removing the stand column for wall-mounting – Dynex DX-LCD37-09-2 User Manual
Page 10
10
Setting up your TV
Removing the stand column for
wall-mounting
If you plan to wall-mount your TV, you must remove the stand column
first.
Note: Your TV may look different that the illustrations in this procedure.
To remove the stand column:
1 Lay your TV face down on the edge of the table or work bench
Caution: Make sure that you place your TV on a soft cushion or covering
to prevent damage to the screen or case.
2 Remove the four screws that secure the stand column to your TV,
then remove the stand column.
Connecting an antenna, cable TV, or
satellite TV box
To connect an antenna, cable TV, or satellite TV box:
1 Make sure that your TV’s power cord is unplugged.
2 Connect a 75 ohm coaxial cable to the RF jack on the back of your
TV, then connect the other end of the cable to the antenna, cable
TV, or satellite TV box.
Stand column
- DX-40L150A11 (2 pages)
- DX-40L260A12 (12 pages)
- DX-LCD26-09 (36 pages)
- DX-L32-10A (2 pages)
- DX-R32TV (56 pages)
- DX-32L221A12 (2 pages)
- DX-15L150A11 (2 pages)
- DX-32E150A11 (2 pages)
- DX-32E150A11 (1 page)
- DX-24L200A12 (44 pages)
- DX-L42-10A (36 pages)
- DX-40L130A11 (2 pages)
- DX37L130A11 (37 pages)
- DX-L19-10A (33 pages)
- DX-L321-10A (32 pages)
- DX-26L100A13 (45 pages)
- DX-37L150A11 (2 pages)
- DX-19LD150A11 (41 pages)
- DX-24LD230A12 (1 page)
- DX-L22-10A (2 pages)
- DX-LCDTV19 (50 pages)
- DX-R24TV (142 pages)
- DX-32L152A11 (2 pages)
- DX-19L150A11 (1 page)
- DX-LCD22-09 (24 pages)
- DX-32L150A11 (38 pages)
- DX-LDVD22-10A (32 pages)
- DX-LCD32-09 (76 pages)
- DX-55L150A11 (25 pages)
- DX-RCRT20-09 (44 pages)
- DX-42E250A12 (38 pages)
- DX-R20TV (142 pages)
- DX-26L150A11 (8 pages)
- DX-LDVD19-10A (36 pages)
- DX-LCD37 (50 pages)
- DX-L15-10A (11 pages)
- DX-24L230A12 (1 page)
- DX-46L260A12 (12 pages)
- DX-LCD19-09 (36 pages)
- DX-L24-10A (31 pages)
- DX-46L261A12 (2 pages)
- DX-LCD19 (124 pages)
- DX-LCD37-09 (64 pages)
- DX-L40-10A (28 pages)