Hanna Instruments HI 98188 - Manual (Page 67)

67
The process can be interrupted by pressing Stop or ESC key.
The replatinization process takes about 5 minutes.
Remove the probe from the replatinization solution and rinse it with deionizated
water.
ACCESSORIES ACCESSORIES ACCESSORIES ACCESSORIES ACCESSORIES
EC CALIBRATION SOLUTIONS
HI 70033C 84
m
S/cm, 20 ml sachet, 25 pcs.
HI 70031C 1413
m
S/cm, 20 ml sachet, 25 pcs.
HI 70039C 5000
m
S/cm, 20 ml sachet, 25 pcs.
HI 70030C 12880
m
S/cm, 20 ml sachet, 25 pcs.
HI 6033 84
m
S/cm, 500 ml, bottle
HI 6031 1413
m
S/cm, 500 ml, bottle
HI 7039L 5000
m
S/cm, 500 ml, bottle
HI 7030L 12880
m
S/cm, 500 ml, bottle
HI 7034L 80000
m
S/cm, 500 ml, bottle
HI 7035L 114800
m
S/cm, 500 ml, bottle
HI 7037L 100% NaCl, 500 ml, bottle
RECOMMENDATIONS FOR USERS
Before using these products, make sure they are entirely suitable for the environment in which
they are used.
Operation of these instruments in residential areas could cause unacceptable interferences to
radio and TV equipment, requiring the operator to follow all necessary steps to correct inter-
ferences.
The glass bulb at the end of the pH electrode is sensitive to electrostatic discharges. Avoid
touching this glass bulb at all times.
During operation, ESD wrist straps should be worn to avoid possible damage to the electrode
by electrostatic discharges.
Any variation introduced by the user to the supplied equipment may degrade the instruments’
EMC performance.
To avoid electrical shock, do not use these instruments when voltages at the measurement
surface exceed 24 Vac or 60 Vcc.
To avoid damage or burns, do not perform any measurement in microwave ovens.